Changing a Fantech HP 2113 fan motor is a simple procedure that may be finished in a couple of easy steps. A fan motor is an integral part of any air flow machine, and changing it when it fails is vital to make certain that your machine continues to perform correctly. Here is a step by step information on tips on how to exchange a Fantech HP 2113 fan motor:
1. Acquire your gear and fabrics. You are going to want a screwdriver, a couple of pliers, and a brand new Fantech HP 2113 fan motor.
2. Flip off the ability to the fan. That is vital for protection causes.
3. Take away the entrance grille of the fan. This will provide you with get entry to to the fan motor.
4. Disconnect {the electrical} wires from the fan motor. Use the pliers to loosen the cord nuts after which pull the wires off of the terminals.
5. Take away the mounting screws from the fan motor. There might be 4 screws that grasp the motor in position.
6. Pull the fan motor out of the housing. Watch out to not injury the wires.
7. Insert the brand new fan motor into the housing. Be sure that the wires don’t seem to be pinched.
8. Safe the fan motor with the mounting screws.
9. Attach {the electrical} wires to the fan motor. Use the pliers to tighten the cord nuts.
10. Change the entrance grille of the fan.
11. Flip at the energy to the fan. The fan will have to now be running correctly.
